Dear Customer:

 

Agritech Lavrale aiming to contribute with the maximum performance of its products, we created a procedure to be carried out when there is a need to stop one of its equipment for a long period of time, during the period in which the products remain idle , the customer must periodically carry out the checks, verifications, actions and recommendations described in the tables below so that the products remain preserved and preserved.

Tractor

Periodic checks of machines in stock

Every 15 days:

Functioning and movement

Action

  • Run the engine for at least 10 minutes*, during this period, perform:
  • Tractor movement, changing gears, including reverse.
  • Turn steering wheel, full stroke between sides;
  • Trigger the TDP lever;
  • Actuation of hydraulic system levers;
  • For cabin tractors: turn on the air conditioning (maximum position), and turn on the headlights and flashlights and activate the wipers and nozzle.
    • * In order for hours not to be recorded on the tractometer during operation, we recommend disconnecting the orange wire from the alternator. Reconnect shortly afterwards.

    Benefits

  • Lubrication, circulation of coolant, fuel and hydraulic oil.
  • Avoid locking of components (clutch and hydraulic cylinders), Lubrication of transmission components (bearings, retainers), Changing position (tires, bearings and retainers).

    • Electrical System

    Action

  • Turn on the headlights (main, work and auxiliary);
  • Trigger the directional switch (arrow), alert and horn

    • Benefits

  • Avoid isolation of electrical current between connector contacts.

    • Every 6 months:

    Fuel

    Action

  • Change the fuel in the reservoir (tank).
  • Additive addition needed.

    • Benefits

  • Eliminate the formation of microorganisms, minimize the formation of sludge originated from decantation (biodiesel and moisture) eliminating the possibility of oxidation in metallic components (tank, tubes). Eliminate the obstruction of tubes and electric pump by the circulation of decanted material; avoid damage to high precision components (injection nozzles and injection pump).

    • Lubrication

    Action

  • Review the grease.

    • Benefits

  • Eliminate the possibility of locking pins and joints.

    • Every 12 months:

    Engine oil

    Action

  • Engine Lube Replacement

    • Benefits

  • Reestablish the functional characteristics of additives, which are the basis for the formation of lubricants.

    • Moto cultivator

    Periodic checks of machines in stock:

    After 15 days of receipt:

    Supply

    Action

  • Supply: water, engine oil, transmission oil and diesel

    • Benefits

  • Lubricants and fuel for micro tractor operation.

    • Every 15 days:

    Functioning and movement

    Action

  • Run the engine for at least 10 minutes, during this period, perform:
  • Tractor movement, changing gears, including reverse.
  • Trigger the steel cables, several times. .

    • Benefits

  • Lubrication, coolant and fuel circulation. Avoid locking components (clutch).
  • Lubricate transmission components (bearings, seals), Changing position (tyres, bearings and seals)

    • Electrical System

    Action

  • Turn on the headlight

    • Benefits

  • Avoid isolation of electrical current between connector contacts

    • Every 6 months:

    Fuel

    Action

  • Change the fuel in the reservoir (tank).
  • Additive addition needed.

    • Benefits

  • Eliminate the formation of microorganisms, minimize the formation of sludge originated from decantation (biodiesel and moisture) and eliminate the possibility of oxidation in metallic components (tank, tubes). Avoid damage to high precision components (injection nozzles and injection pump).

    • Lubrication

    Action

  • Check wire ropes and lubricate if necessary

    • Benefits

  • Eliminate the possibility of cable locks.

    • Every 12 months:

    Engine oil

    Action

  • Engine Lube Replacement

    • Benefits

  • Reestablish the functional characteristics of additives, which are the basis for the formation of lubricants.